5x Original Desoldering Wire BGA Tools Goot Wick With Soldering Rosin Braid For Iron Electronic IC Chip Logic Board PCB Repair

Original Desoldering Wire BGA Tools Goot Wick With Soldering Rosin Accessory Braid For Iron Electronic PCB Repair

1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.

2. Remove the desoldering wick after the solder has been absorbed.

3. Cut off the used section of the wick using nippers.

4. Repeat steps 1 2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63 Percent and 60 Percent  (tin content) have good absorbability.

Packing 1

CP2015:

5x CP2015

1x Soldering Rosin

Packing 2

CP2515:

5x CP2515

1x Soldering Rosin

Packing 3

CP2015 to CP3515:

1x CP2015

1x CP2515

1x CP3015

1x CP3515

1x Soldering Rosin

Packing 4

CP3015:

5x CP3015

1x Soldering Rosin

Packing 5

CP3515:

5x CP3515

1x Soldering Rosin